Managing The Devices List - Thermo Scientific EASY-nLC 1200 Troubleshooting And Maintenance Manual

Managing the Devices List

Thermo Scientific
The Device list on the Maintenance >Devices page lists the current devices installed in the
EASY-nLC instrument.
When you add or remove a device that is not automatically detected during the startup
procedure, you must add the device to or remove the device from the Devices list on the
Maintenance > Devices page.
❖ To add a device to the Device list
1. Press Maintenance > Devices.
2. Press Add Device.
The Select a Device to Add dialog box opens.
3. Locate the device in the list and select it.
4. Press Accept to add the autosampler device to the Devices list and close the Select a
Device to Add dialog box.
5. Verify that the device was added to the system by locating it in the Devices list. Select the
device in the Devices list, and review the information on the About page.
❖ To remove a device from the Devices list
1. Press Maintenance > Devices.
2. Select the device in the Devices list.
3. Press Remove Device.
The Remove Device dialog box appears.
4. Press Accept to remove the device and return to the Maintenance > Devices page.
5
Routine Maintenance
Managing the Devices List
Troubleshooting & Maintenance Guide 99