Table of Contents
Advertisement
6
Field Service Maintenance
Replacing the Monitor
108
EASY-nLC 1200 Troubleshooting & Maintenance Guide
5. Using a 2 mm ball driver and the screws that you removed in
the monitor to the instrument.
• Use a Torx T-10 wrench and the three screws that you removed in
to secure the top-front panel to the housing.
6. Mount the left side panel to the instrument housing. Then, with a #2 screwdriver, secure
the panel by rotating the three captive screws a quarter-turn clockwise.
7. Plug in the power cable, and turn on the EASY-nLC instrument.
step 3
on
page
106, secure
step 2
on
page 106
Thermo Scientific
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
