Saving System Files On A Usb Removable Storage Device - Thermo Scientific EASY-nLC 1200 Troubleshooting And Maintenance Manual

9
Remote Support

Saving System Files on a USB Removable Storage Device

Saving System Files on a USB Removable Storage Device
250 EASY-nLC 1200 Troubleshooting & Maintenance Guide
The EASY-nLC system includes network capability. Through the network you can back up
your system, export and import batches and methods, analyze your system by examining the
log files, and perform many other tasks. However, when you are not connected to the network
or the network is broken, or you do not have a computer with network access that is near the
EASY-nLC system, you can use the copy function to copy all the system files on the system to
a USB removable storage device, such as a USB flash drive or memory stick.
The EASY-nLC system ships with a USB flash drive for your convenience. But you can use
any USB storage device formatted with the file system FAT/FAT16 and at least 128 MB of
free space.
❖ To copy system files to a USB storage device
1. Press Maintenance > Support.
The Support page of the Maintenance menu opens (see
2. Insert the USB storage device into the connector panel on the back of the EASY-nLC
instrument. Choose between one of two USB ports on the upper left side of the panel
(see Figure 183).
Figure 183. USB port location on the back panel of the EASY-nLC instrument
3. In the Log File Copy area, select the To USB Removable Storage option.
Note When you select the To Home Directory option, the EASY-nLC system creates
zip files in the admin folder.
For information about accessing the admin folder from another computer on your
local network, refer to the EASY-nLC 1200 Getting Started Guide.
Figure 181 on page 247).
Thermo Scientific