Thermo Scientific EASY-nLC 1200 Troubleshooting And Maintenance Manual page 125

Thermo Scientific
Figure 84. Screws that secure the back panel to the instrument housing
6. Using a Torx T-10 wrench, remove the two screws that secure the top panel to the
instrument (see Figure
7. Remove the computer box from the instrument as follows:
a. Using a Torx T-10 wrench, remove the bottom two screws that secure the computer
box to the instrument (see
b. Raise the top panel by at least one inch.
c. Using a Torx T-10 wrench, remove the top two screws that secure the computer box
to the instrument (see
84).
Figure 85).
Figure 85).
EASY-nLC 1200 Troubleshooting & Maintenance Guide
6
Field Service Maintenance
Replacing the Built-In Computer
Top panel that overlaps
the back panel by 1 inch
Three screws that
secure the back
panel to the
instrument
103