Thermo Scientific EASY-nLC 1200 Troubleshooting And Maintenance Manual page 93

Thermo Scientific
3. "Priming the Pump"
4. "Resetting the Pump Usage Counter"
5. "Removing Air After Replacing a Piston Seal or a Pump"
6. Depending on whether you are performing maintenance on one of the chromatography
pumps (pump A or B) or on the sample pump (pump S), follow one of these procedures:
• For pumps A and B, run a pump leak test as described in
after Replacing a Piston Seal or a Pump"
• For pump S, run a sample pickup test as described in
on page 78
on page 80
on
5
Routine Maintenance
Maintaining the Syringe Pumps
on page 81
"Running the Leaks Script
page 81.
"Sample Pickup"
Troubleshooting & Maintenance Guide
on page 42.
71