Thermo Scientific EASY-nLC 1200 Troubleshooting And Maintenance Manual page 80

3
Maintenance Scripts and Service Records
Keeping Service Records
58 EASY-nLC 1200 Troubleshooting & Maintenance Guide
The Log Entry dialog box opens.
Figure 44. Log Entry dialog box
3. In the box at the top of the dialog box, enter a description of the service action.
4. In the Template list, select a template.
The Template list contains the following selections: Comment, New Part, Maintenance,
Property Change, and Precolumn Changed by <User> on <Date>.
5. In the Components list, select a hardware component.
The Components list contains the following selections: None, Gradient, Valve B, Valve A,
Valve S, Valve W, Analytical Column, Precolumn, Autosampler, Pump A, Pump B,
Pump S, and other added devices such as the EASY-Spray™ column heater.
6. Do one of the following:
• Press Add to add this entry and keep the Log Entry dialog box open.
• Press Add and Close to add this entry and close the Log Entry dialog box.
• Press Close to close the Log Entry dialog box without saving any entries.
❖ To search the log
1. In the Log Book list, select Queue Job or User.
2. In the User List, select Any, Admin, or Guest.
3. In the Time From list, select a time.
4. In the Time To list, select a time.
5. Press Search.
The search results appear in the Search Result table.
Thermo Scientific