•
Clearing up the Stored Preset by CTP20
Clearing up the Stored Preset by Remote control
Procedure
1. Do one of the following on your remote control when your system is idle:
•
Select the local video image and press OK key, and then press
•
For VC880/VC800/VC500/PVT980/PVT950, navigate to More > Preset Location.
2. Select Clear and then press OK key.
3. Select OK, and then press OK key.
Clearing up the Stored Preset by CTP20
Procedure
1. In idle state, tap Camera to go to the Preset page.
2.
In the Preset Location field, tap
It prompts whether or not you want to clear the preset position.
3. Tap OK to clear up.
Accessories with Your System
•
Using VCM34
•
Using Hardware of CPE90 Wired Expansion Microphones
Using the Soundbar
•
Using the CPW90-BT Bluetooth Wireless Microphones with VCS
•
•
Using WPP20 Wireless Presentation Pod
•
Using the CPN10 PSTN Box
•
Using the VCC22 Video Conferencing Cameras
Using VCM34
To further improve the sound quality, you can connect VCM34 to the VCS codec. If you need to expand the
pickup range, you can connect to multiple VCM34s in cascade (up to 4 VCM34s). For more information, refer to
Yealink_VCM34_Quick_Start_Guide.
Using Hardware of CPE90 Wired Expansion Microphones
This section introduces how to use CPE90 Wired Expansion Microphones.
•
Placing CPE90 Wired Expansion Microphones
•
Muting or Unmuting the Microphone
>
.
| Accessories with Your System | 96
.