Call Protocol - Yealink VC110 User Manual

If the call history is more than one page, you can press
Press
4.
Enter contact name in the Name field.
5.
You can add more than one number for the contact. For more information, refer to
Local Contacts
Press
6.
Call history management feature is configurable via the web user interface at the path
Directory->History.

Call Protocol

The VC110 video conferencing endpoint supports SIP and H.323 call protocols. H.323 is
commonly used to communicate to other video conferencing endpoints. SIP is commonly used
to communicate with other VoIP devices. You can configure which protocol is to be used when
the endpoint is making calls. When the Auto call protocol is used, the endpoint preferentially
uses the H.323 protocol to place calls. If there is no available H.323 account on the endpoint, the
endpoint will switch to the SIP protocol. You can also specify the desired protocol for the
endpoint to place calls via the remote control or web user interface.
Note Before configuring call
more information, contact your system administrator.
(Add to Contact soft key).
on page 62.
(Save soft key) to save the contact.
protocol
, ensure the remote endpoint supports the call
Customizing the VC110 Video Conferencing Endpoint
or to turn pages.
Adding
protocol
too. For
77