Configuring General Settings; Setting The Site Name - Yealink VC880 Administrator's Manual

Parameter
VMR Server 1 to 5
The dialing screen of your web user interface and the monitor will appear the configured VMR. You can select the
desired VMR from the pull-down menu, and then enter the conference ID to call the corresponding VMR.

Configuring General Settings

•

Setting the Site Name

• Setting the Language
• Setting Time and Date
Allowing Website Snapshot
•
• Adjusting Backlight of the CP960 Conference Phone
• Customizing the Local Interface
• Configuring the Keyboard Input Method
• Configuring USB Storage
• Configuring Local Storage
Capturing Screenshots by Using Remote Control
•
Configuring Video Recording
•
Setting the Site Name
You can customize the site name.
Procedure
1. Do one of the following:
On your web user interface, go to Setting > General > General Information > Site Name.
•
On your remote control, go to More > Setting > Basic > Site Name.
•
• On your CTP20, tap Setting > Basic > Site Name.
2. Configure and save the following settings:
Description
The IP address or the domain
name of the VMR server.
Note:
• The VMR server 1 is
zoomcrc.com by default.
• The VMR server 2 is bjn.vc
by default.
• The VMR server 3 to 5 is
empty by default.
It only works when you do not
log into a Cloud platform, or you
only register a Yealink Cloud
account/YMS account.
| Configuring System Settings | 88
Configuration Method
Web user interface