Site Name - Yealink VC800 Administrator's Manual

Administrator's Guide for Yealink VC800 Video Conferencing System
Parameter
To configure a custom key type via web user interface:
Click on Setting->Remote Control.
1.
Select the desired value from the pull-down list of Custom Key Type.
2.
Click Confirm to accept the change.
3.

Site Name

When the system is idle, the site name is displayed on the status bar of display device. You can
make an IP address call to the far site, the site name will be displayed on the display device of
the far site. Site name can consist of letters, numbers or special characters. You can configure
the site name of the system via the remote control or web user interface.
The site name parameter is described below:
Parameter
Site Name
158
Description
or unmute the speaker.
Presentation: press to start or

stop presentation.
Default: Input
Description
Configures the site name of the
system.
Valid values: String within 64
characters
Default: Yealink VC800
Configuration Method
Configuration Method
Remote Control
Web User Interface