Setting The Language; Setting Time And Date - Yealink VC880 Administrator's Manual

Parameter
Site Name

Setting the Language

You can specify a language displayed in the monitor and the web user interface respectively. The CP960 conference
phone will detect and use the same language as the monitor.
Procedure
1. Do one of the following:
On your web user interface, click Language at the top of the web page.
•
• On your remote control, go to More > Setting > Basic > Language.
• On your CTP20, tap Setting > Basic > Language.
2. Select the desired language.
3. Save the change.

Setting Time and Date

Your system can obtain the time and date from SNTP (Simple Network Time Protocol) time server automatically. You
can also set the time and date manually.
Expand-Time zone
•
NTP Settings
•
• Configuring the DST
• Configuring Time and Date Manually
• Customizing the Time and Date Format
• Setting the Reminder
Expand-Time zone
You can set the time difference between GMT (Greenwich Mean Time) and your location. Therefore, different areas
can keep the time consistency for the commence and communication. The following table lists the available time zone
on video conferencing system.
Time zone
−11:00
-10:00
-10:00
-09:30
-09:00
-08:00
Description
Configures the site name of the
system.
Note: you can enter 64
characters at most.
Time zone
Samoa
United States-Hawaii-
Aleutian
United States-Alaska-
Aleutian
French Polynesia
United States-Alaska
Time
Canada (Vancouver,
Whitehorse)
Configuration Method
Web user interface
Remote control
CTP20
Time zone
+01:00
+02:00
+02:00
+02:00
+02:00
+02:00
| Configuring System Settings | 89
Time zone
Poland (Warsaw)
Estonia (Tallinn)
Finland (Helsinki)
Gaza Strip (Gaza)
Greece (Athens)
Israel (Tel Aviv)