Canon imagePRESS 1135 Series Service Manual page 1597

■ Type of Mode
There are two types of operator maintenance mode; the one for LUI displayed on the control
panel of the machine, and the one for the imagePRESS ServerXXXX *1 (hereinafter referred
as image PRESS Server) displayed at the time of installing the imagePRESS Server.
(The exclusive control is applied to the operator maintenance modes for LUI and
imagePRESS Server, both of which cannot be displayed at the same time.)
In order to display the operator maintenance, set '1' in the following service mode setting to
enable the operator maintenance mode.
COPIER > OPTION > BODY > OPEMANT (level 2)
* For other setting information, see 'Installation Procedure'.
*1 The name varies between models
Caution :
The counter value displayed on the operator maintenance mode and the data of
mechanical system such as parts display setting are all displayed the value saved on
the controller of the machine.
The same data of the mechanical system is used irrespective of either for LUI or for the
external controller.
● Operator maintenance mode (for Main Machine UI)
Enter the operator maintenance mode for Main Machine UI in Additional Function > Operator
maintenance mode.
Additional Functions
Common Settings
Timer Settings
Adjustment/Cleaning
Report settings
Voice Navigation
Settings
System Settings
Copy Settings
Communications
Settings
Mail Box Settings
Address Book Settings
Operator Maintenance
Mode
Done
System Monitor
F-10-39
Appendix > Operator Maintenance > Operator Maintenance Mode > Type of Mode
● Operator maintenance mode (for imagePRESS Server)
To start the operator maintenance mode for the imagePRESS Server, select [Program] >
[Canon OM App] > [Start OM App] in the Windows [Start] menu tostart the boot screen, and
hold down [Display].
Caution :
The application for the operator maintenance has not been installed in the imagePRESS
Server. To display the screen of the operator maintenance for the imagePRESS Server,
the service technician should install the application for the operator maintenance to the
imagePRESS Server at the time of the installation. (For the details of operations, see
'Installation'.)
English
Appendix > Operator Maintenance > Operator Maintenance Mode > Type of Mode
10-43
F-10-40
10-43