Canon imagePRESS 1135 Series Service Manual page 1529

17) Install the cable.
17-1) Insert the cable into the voice guidance board.
18) Install the edge saddle to the CP side cover.
9
Installation > Voice Guidance Kit-E1 > Installation Procedure
17-2) Insert the earphone cord into the voice guidance board and put it through the wire holder.
CAUTION:
Be sure to take up the slack
of the earphone cord after
putting it through the wire
holder to prevent it from
being caught by the fan.
F-9-234
19) Put the cable installed in step 17) through the edge saddle and install the CP side cover.
• 4 screws(Use the screw removed in step 10).)
CAUTION:
Be sure to take up the
slack of the earphone
cord in the host machine
to prevent it from being
caught by the fan.
F-9-236
9 Installation > Voice Guidance Kit-E1 > Installation Procedure
x4
x1
9-112
F-9-235
F-9-237
9-112