Installation Procedure - Canon imagePRESS 1135 Series Service Manual

Installation Procedure

MEMO:
When installing the IP Sec security board at the same time, install it after the step 5).
1) Remove the 3 screws on the controller cover.
x3
3) Install the 3 spacers.
9
Installation > Expansion Bus-F1/F2 > Installation Procedure
2) Remove the controller cover in the direction of the arrow.
• 12 screws (loosen)
F-9-244
9 Installation > Expansion Bus-F1/F2 > Installation Procedure
F-9-245
F-9-246
9-117
9-117