Table of Contents
Advertisement
Mounting
3.2 EMC-compliant setup of the machine or plant
Figure 3-3
Further information
Additional information about EMC-compliant installation is available in the Internet:
60612658)
3.2.2
Cables
Cables with a high level of interference and cables with a low level of interference are
connected to the converter:
● Cables with a high level of interference:
– Cable between the line filter and converter
– Motor cable
– Cable at the converter DC link connection
● Cables with a low level of interference:
– Cable between the line and line filter
– Signal and data cables
54
Grounding and high-frequency equipotential bonding measures in the control cabinet and
in the plant/system
EMC installation guideline
(http://support.automation.siemens.com/WW/view/en/
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
SINAMICS G120X converter
Advertisement
Table of Contents
