A.2.5
A parameter cannot be changed
When cannot you change a parameter?
The inverter indicates why it currently does not permit a parameter to be changed:
Read parameters cannot
The operating state in which you can change a parameter is provided in the List Manual for
each parameter.
SINAMICS G120C converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
The parameter can only be adjusted
be adjusted
during quick commissioning.
A.2 Handling the BOP 2 operator panel
A parameter can only be adjusted
when the motor is switched off
Appendix
443