Removing And Installing Oil Sump Bottom Part - Skoda Octavia III 2013 Workshop Manual

8 - Connector
9 - Baffle
10 - Sump top part
❑ removing and installing
11 - Oil filter
❑ Moisten gasket with oil before installing
❑ In case of damage to the outer skin, the oil filter must be replaced
❑ 20 Nm
12 - Sump bottom part
❑ removing and installing
13 - Screw
❑ Tightening torque and tightening order
14 - Sealing ring
❑ replace
15 - Oil drain plug
❑ 30 Nm
16 - Screw
❑ replace
❑ Tightening torque and tightening order
17 - Suction line
18 - Screw
❑ 8 Nm
19 - Screw
❑ replace
❑ Tightening torques
20 - Screw
❑ for the tensioning device
❑ Tightening torques
21 - Sealing ring
❑ removing and installing
❑ for oil pump drive
22 - Screw
❑ replace
❑ Tightening torques
23 - Oil pump
❑ removing and installing
24 - Gasket
❑ replace
❑ Observe positioning of runners
1.2 Removing and installing oil sump bot‐
tom part
Special tools and workshop equipment required
♦ Socket insert - T10058-
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
⇒ page 132
⇒ page 129
⇒ page 132
⇒ page 135
⇒ page 136
⇒ page 44
⇒ page 53
⇒ page 136
⇒ page 135
1.6/81 kW MPI engine - Edition 06.2014
1. Lubrication system
129