Removing And Installing The Spray Nozzles For Windscreen Washer System - Skoda Octavia III 2013 Workshop Manual

– Remove expansion clip -1- and push filler neck -3- with filler
pipe -4- out of the bracket -2-.
– Screw out nut -arrow- (8 Nm).
– Screw out nuts -1- and -3- (8 Nm)
– Screw out the vessel -2- from the stud bolt -arrow A- and lower
-arrow B-.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Hoses with angled pieces must click audibly into the connec‐
tions on the washer fluid pumps.
– After completing the assembly work bleed the headlamp
cleaning system
⇒ "2.3 Bleed the headlamp cleaning system", page 67
1.2 Removing and installing the spray noz‐
zles for windscreen washer system
Removing
– Remove windscreen wiper arms
⇒ "3.2 Removing and installing the wiper arms with wiper
blades and setting their final setting", page 68
Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
.
.
1. Windscreen and rear window wiper system
63