Receive Finish Queue Full - Xerox DocuColor 2240 Service Manual

102-318 Receive Finish Queue Full

The data received from the Controller exceeded the upper limit of the processing capability in
the Panel.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Perform re-installation of the software.
Status Indicator RAPs
102-318, 102-319
102-319 Send with No ACK
Serial communication failure. Sending failure, ACK was not returned.
Procedure
Switch power off then on. Status code 116-325 is displayed temporarily, then 102-319 is
displayed.
Y N
Status Code 102-319 is displayed.
Y N
Return to service call procedures.
Perform re-installation of the software.
Go to 116-325.
02/03
2-404
Initial issue
DC 3535/2240/1632