Auerswald COMpact 5200 Advanced Information page 1161

Ethernet Configuration
The PBX can be reached via the IP address 169.254.1.240, if
• it is directly connected to an individual computer which automatically
receives its IP address.
• it is connected to a router that automatically assigns IP addresses.
Configuration IPv6
Opens the IPv6 configuration.
Mode IPv6
If IPv6 is switched on, an IP address complying with version 6 of the
Internet protocol can be assigned to the PBX. Thanks to the greater
length of IPv6 addresses (eight blocks with four digits each, example:
3001:00FF:ABC0:0EAC:0001:0000:0000:000F), IPv6 offers a greater
number of available IP addresses than version 4 of the Internet protocol
(IPv4).
disabled
Switches the use of IPv6 addresses off.
SLAAC
Automatically assigns an IPv6 address to the PBX.
statique
Assigns a user-defined IPv6 address to the PBX.
IPv6 settings
Requirements:
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 1161 -