Insert Restoration Point - Auerswald COMpact 5200 Advanced Information

Insert Restoration Point

Insert Restoration Point
Proceed as follows:
Using the Configuration Manager (page Administration >
•
Sauvegarde de données)
• For automatic upload: Using the PBX
Définir le point de restauration
If a restoration point for the configuration data is set, the current
configuration data is saved in a configuration file in the PBX. The
configuration files are archived with information about the time and date
they were created. They are available in the Fichier de configuration list
field under Restaurer les anciennes données de configuration.
A maximum of ten restoration points are set. If an eleventh restoration
point is set, the oldest of the current restoration points is overwritten.
Note: A restoration point is automatically inserted at every firmware
update.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 1137 -