Ntp-B127 Verify Network Turn Up; Chapter 5 Create Circuit And Vt Tunnel - Cisco ONS 15327 Procedure Manual

Chapter 5 Create Circuits and VT Tunnels
ONS 15327 circuits are either VT or STS circuits.
options for VT circuits.
Table 5-2
Card
XTC-14
XTC-28-3
OC3 IR 4 1310
OC12 IR 1310
OC12 LR 1550
OC48 IR 1310
OC48 LR 1550
Table 5-3
Table 5-3
Card
XTC-14
XTC-28-3
OC3 IR 4 1310
OC12 IR 1310
OC12 LR 1550
OC48 IR 1310
OC48 LR 1550

NTP-B127 Verify Network Turn Up

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
will create circuits. If you are already logged in, continue with Step 2.
From the View menu choose Go to Network View. Wait for all the nodes that are part of the network to
Step 2
appear on the network map. (Large networks may take several minutes to display all the nodes.)
March 2003
CTC Circuit Source and Destination Options For VT Circuits
Ports
–
–
4
–
–
shows the options that display for STS circuits.
CTC Circuit Source and Destination Options for STS Circuits
Ports
–
4
1
1
–
This procedure verifies that the ONS 15327 network is ready for circuit
provisioning.
None
Chapter 4, "Turn Up Network"
Required
Onsite or remote
Provisioning or higher
"DLP-B60 Log into CTC" task on page 2-23
Table 5-2 shows the circuit source and destination
STSs VTs
– –
– –
3 per port 28 per STS
12 28 per STS
48 28 per STS
STSs DS1s
– –
– 1
3 per port –
12 –
48 –
at an ONS 15327 on the network where you
Cisco ONS 15327 Procedure Guide, R4.0
NTP-B127 Verify Network Turn Up
DS1s DS3s
14 –
28 3
– –
– –
– –
DS3s
–
3
–
–
–
5-3