Ntp-B73 Enable Performance Monitoring; Dlp-B121 Enable Pointer Justification Count Performance Monitoring; Table 7-1 Traffic Cards That Terminate The Line (Ltes) - Cisco ONS 15327 Procedure Manual

NTP-B73 Enable Performance Monitoring

NTP-B73 Enable Performance Monitoring
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
already logged in, continue with
Complete the
Step 2
if you need to monitor clock synchronization.
Complete the
Step 3
need to monitor large amounts of STS traffic through intermediate nodes.
Stop. You have completed this procedure.

DLP-B121 Enable Pointer Justification Count Performance Monitoring

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the card where the line terminates (drops), called a line-terminating
Step 1
equipment (LTE) card. The card view appears.
Table 7-1
Table 7-1
Line Terminating Equipment
XTC-14
OC3 IR 1310
OC12 LR 1550
OC48 LR 1550
Cisco ONS 15327 Procedure Guide, R4.0
7-2
This procedure describes how to enable performance monitoring.
None
None
As Needed
Onsite or remote
Provisioning or higher
"DLP-B60 Log into CTC" task on page 2-23
Step
"DLP-B121 Enable Pointer Justification Count Performance Monitoring" task on page 7-2
"DLP-B122 Enable Intermediate-Path Performance Monitoring" task on page 7-4
This task enables pointer justification counts, which provide a way to
align the phase variations in STS and VT payloads and to monitor the
clock synchronization between nodes. A consistent, large pointer
justification count indicates clock synchronization problems between
nodes.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
lists the Cisco ONS 15327 LTE cards.
Traffic Cards that Terminate the Line (LTEs)
at the node you want to monitor. If you are
2.
XTC-28-3
OC12 IR 1310
OC48 IR 1310
Chapter 7 Monitor Performance
if you
March 2003