Dlp-B142 Modify A Static Route; Dlp-B143 Delete A Static Route - Cisco ONS 15327 Procedure Manual

NTP-B201 Change CTC Network Access

DLP-B142 Modify a Static Route

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, click the Provisioning > Network tabs.
Click the Static Routing tab.
Step 2
Click the static route you want to edit.
Step 3
Click Edit.
Step 4
In the Edit Selected Static Route dialog box, enter the following:
Step 5
•
•
•
See the
Step 6 Click OK.
Return to your originating procedure (NTP).
Step 7

DLP-B143 Delete a Static Route

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Network > Static Routing tabs.
Step 1
Click the static route you want to delete.
Step 2
Click Delete. A confirmation dialog box appears.
Step 3
Click Yes.
Step 4
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15327 Procedure Guide, R4.0
9-6
Use this task to modify a static route on an ONS 15327.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
Mask
Next Hop
Cost
"DLP-B65 Create a Static Route" task on page 3-9
Use this task to delete an existing static route on an ONS 15327.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
Chapter 9 Change Node Settings
for detailed field descriptions.
March 2003