NTP-B48 Subtend a BLSR from a BLSR
If the subtending BLSR is not already created, complete the
Step 7
page 4-15
ring ID of the first BLSR. The subtending node can have one Node ID that is used in both BLSRs, or a
different Node ID for each BLSR. For example, the same node can be Node 4 in BLSR 1 and Node 2 in
BLSR 2.
Display the network view to see the subtending ring.
Step 8
Step 9
Complete the
Stop. You have completed this procedure.
Cisco ONS 15327 Procedure Guide, R4.0
4-34
to provision the new BLSR. The subtending BLSR must have a ring ID that differs from the
"NTP-B175 BLSR Acceptance Test" procedure on page
Chapter 4
"NTP-B126 Create a BLSR" procedure on
4-17.
Turn Up Network
March 2003