Ntp-B 30 Create Users And Assign Security; Dlp-B74 Create A New User - Single Node - Cisco ONS 15327 Procedure Manual

Chapter 3 Turn Up Node
NTP-B30 Create Users and Assign Security
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
If you are already logged in, continue with Step 2.
Note
Complete the
Step 2
New User - Multiple Nodes" task on page 3-4
Note
If you want to modify the security policy settings, complete the
Step 3
Security" procedure on page
Stop. You have completed this procedure.

DLP-B74 Create a New User - Single Node

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Security > Users tabs.
Step 1
In the Security window, click Create.
Step 2
In the Create User dialog box, enter the following:
Step 3
•
March 2003
This procedure creates ONS 15327 users and assigns their security levels.
None
NTP-B24 Verify Card Installation, page 3-2
As needed
Onsite or remote
Superuser only
"DLP-B60 Log into CTC" task on page 2-23
You must log in as a Superuser to create additional users. The CISCO15 user provided with each
ONS 15327 can be used to set up other ONS 15327 users. You can add up to 500 users to one
ONS 15327.
"DLP-B74 Create a New User - Single Node" task on page 3-3
You must add the same user name and password to each node a user will access.
9-17.
This task creates a new user for one ONS 15327.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Superuser only
Name—Type the user name. The name must have a minimum of six and a maximum of 20
alphanumeric characters (a-z, A-Z, 0-9). For TL1 compatibility, the user name must have 6 to 10
characters, and the first character must be an alpha character.
NTP-B30 Create Users and Assign Security
at the node where you need to create users.
as needed.
"NTP-B205 Modify Users and Change
Cisco ONS 15327 Procedure Guide, R4.0
or the "DLP-B75 Create a
3-3