Dlp-B327 Install Fiber-Optic Cables On The Lgx Interface; Dlp-B42 Install Fiber-Optic Cables On Oc-N Cards - Cisco ONS 15327 Procedure Manual

NTP-B221 Install Optical Cables

DLP-B327 Install Fiber-Optic Cables on the LGX Interface

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Inspect and clean all fiber connectors thoroughly. See the
Note
procedure on page 14-20
connectors that are not used.
Align the keyed ridge of the cable connector with the receiving SC connector on the LGX faceplate
Step 1
connection point. Each module supports at least one transmit and one receive connector to create an
optical carrier port.
Gently insert the cable connector into the faceplate connection point until the connector snaps into place.
Step 2
Connect the fiber optic cable to the OC-N card. See the
Step 3
Cards" task on page
Return to your originating procedure (NTP).
Step 4

DLP-B42 Install Fiber-Optic Cables on OC-N Cards

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Inspect and clean all fiber connectors thoroughly. See the
Note
procedure on page 14-20
connectors that are not used.
Cisco ONS 15327 Procedure Guide, R4.0
1-42
This task installs fiber-optic cables on the Lightguide Cross Connect (LGX)
interface in the Central Office.
Fiber-optic cables
NTP-B218 Install the Optical and Ethernet Cards, page 1-23
NTP-B112 Clean Fiber Connectors, page 14-20
As needed
Onsite
None
for instructions. Dust particles can degrade performance. Put caps on any fiber
1-42.
This task installs fiber-optic cables on optical (OC-N) cards.
Fiber-optic cables
NTP-B218 Install the Optical and Ethernet Cards, page 1-23
NTP-B112 Clean Fiber Connectors, page 14-20
DLP-B327 Install Fiber-Optic Cables on the LGX Interface, page 1-42
applicable)
As needed
Onsite
None
for instructions. Dust particles can degrade performance. Put caps on any fiber
Chapter 1
"NTP-B112 Clean Fiber Connectors"
"DLP-B42 Install Fiber-Optic Cables on OC-N
"NTP-B112 Clean Fiber Connectors"
Install Hardware
(as
March 2003