Cisco ONS 15327 Procedure Manual page 92

NTP-B22 Set Up CTC Computer to Connect to the ONS 15327
If you have Windows NT 4.0 installed on your PC, complete the following steps:
Step 3
From the Windows Start menu, choose Settings > Control Panel.
a.
In the Control Panel dialog box, click the Network icon.
b.
In the Network dialog box, click the Protocols tab, choose TCP/IP Protocol, then click Properties.
c.
Click the IP Address tab.
d.
e. In the IP Address window, click Obtain an IP address from a DHCP Server.
f. Click OK.
Click Apply.
g.
If Windows prompts you to restart your PC, click Yes.
h.
If you have Windows 2000 installed on your PC, complete the following steps:
Step 4
From the Windows Start menu, choose Settings > Network and Dial-up Connections >
a.
Local Area Connection.
In the Local Area Connection Status dialog box, click Properties.
b.
In the General tab, choose Internet Protocol (TCP/IP), then click Properties.
c.
Click Obtain an IP address from a DHCP Server.
d.
e. Click OK.
f. In the Local Area Connection Properties dialog box, click OK.
g. In the Local Area Connection Status dialog box, click Close.
If you have Windows XP installed on your PC, complete the following steps:
Step 5
From the Windows Start menu, choose Control Panel > Network Connections.
a.
Note
In the Network Connections dialog box, click Local Area Connection.
b.
In the Local Area Connection Status dialog box, click Properties.
c.
In the General tab, choose Internet Protocol (TCP/IP), then click Properties.
d.
e. Click Obtain an IP address automatically.
Click OK.
f.
In the Local Area Connection Properties dialog box, click OK.
g.
In the Local Area Connection Status dialog box, click Close.
h.
Return to your originating procedure (NTP).
Step 6
Cisco ONS 15327 Procedure Guide, R4.0
2-14
If the Network Connections menu is not available, click Switch to Classic View.
Chapter 2 Connect the PC and Log into the GUI
March 2003