Ntp-B198 Monitor Ethernet Performance - Cisco ONS 15327 Procedure Manual

Chapter 7 Monitor Performance

NTP-B198 Monitor Ethernet Performance

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
already logged in, continue with
Complete the
Step 2
As needed, use the following tasks to change the display of Ethernet statistical PM counts:
Step 3
•
•
•
Step 4 Complete the
As needed, use the
Step 5
page 7-18
Complete the
Step 6
As needed, use the following tasks to change the display of Ethernet history PM counts:
Step 7
•
•
Stop. You have completed this procedure.
March 2003
This procedure allows you to view node transmit and receive
performance on an Ethernet card and port at specified time intervals to
detect possible performance problems.
None
Before you monitor performance, be sure you have created the
appropriate circuits and provisioned the card according to your
specifications. For more information, see
and VT Tunnels"
As needed
Onsite
Retrieve or higher
"DLP-B60 Log into CTC" task on page 2-23
"DLP-B256 View Ethernet Statistics PM Parameters" task on page 7-16
DLP-B260 Set Auto-Refresh Interval for Displayed PM Counts, page 7-12
DLP-B129 Reset Current PM Counts, page 7-11
DLP-B130 Clear Selected PM Counts, page 7-11
"DLP-B257 View Ethernet Utilization PM Parameters" task on page 7-17
"DLP-B259 Refresh Ethernet PM Counts at a Different Time Interval" task on
to change the display of Ethernet utilization PM counts:
"DLP-B258 View Ethernet History PM Parameters" task on page 7-18
DLP-B261 Refresh PM Counts for a Different Port, page 7-8
DLP-B259 Refresh Ethernet PM Counts at a Different Time Interval, page 7-18
and Chapter 10, "Change Port Settings."
Step 2.
NTP-B198 Monitor Ethernet Performance
Chapter 5, "Create Circuits
at the node you want to monitor. If you are
Cisco ONS 15327 Procedure Guide, R4.0
as needed.
as needed.
as needed.
7-15