Before You Begin - Cisco ONS 15327 Procedure Manual
Hide thumbs
Also See for ONS 15327:
- User documentation (559 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
Create Circuits and VT Tunnels
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
Note
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
This chapter explains how to create Cisco ONS 15327 electrical circuits, VT tunnels, optical circuits,
and Ethernet circuits. For additional information about ONS 15327 circuits, refer to the Circuits and
Tunnels chapter in the Cisco ONS 15327 Reference Manual.
Before You Begin
Before performing any of the following procedures, investigate all alarms and clear any trouble
conditions. Refer to the Cisco ONS 15327 Troubleshooting Guide as necessary.
This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
March 2003
NTP-B127 Verify Network Turn Up, page
circuits.
NTP-B181 Create an Automatically Routed DS-1 Circuit, page
NTP-B182 Create a Manually Routed DS-1 Circuit, page
NTP-B183 Create a Unidirectional DS-1 Circuit with Multiple Drops, page
needed.
NTP-B184 Create an Automatically Routed DS-3 Circuit, page
NTP-B185 Create a Manually Routed DS-3 Circuit, page
NTP-B186 Create a Unidirectional DS-3 Circuit with Multiple Drops, page
needed.
NTP-B133 Create an Automatically Routed VT Tunnel, page
NTP-B134 Create a Manually Routed VT Tunnel, page
NTP-B187 Create a VT Aggregation Point, page
NTP-B135 Test Electrical Circuits, page
electrical circuit.
C H A P T E R
5-3—Complete this procedure before you create any
5-5—Complete as needed.
5-10—Complete as needed.
5-18—Complete as needed.
5-22—Complete as needed.
5-30—Complete as needed.
5-32—Complete as needed.
5-35—Complete as needed.
5-37—Complete this procedure after you create an
Cisco ONS 15327 Procedure Guide, R4.0
5
5-13—Complete as
5-24—Complete as
5-1
Advertisement
Table of Contents
