Dlp-B257 View Ethernet Utilization Pm Parameters - Cisco ONS 15327 Procedure Manual

Chapter 7 Monitor Performance

DLP-B257 View Ethernet Utilization PM Parameters

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click an E-Series or G-Series Ethernet card. The card view appears.
Step 1
Click the Performance tab.
Step 2
Step 3 Click the Utilization subtab
Figure 7-7
Card View
Performance
Utilization
Click the Refresh button. Performance monitoring utilization values for each port on the card appear.
Step 4
View the Port # column to find the port you want to monitor.
Step 5
Step 6 View the Prev-n columns to find Tx and Rx bandwidth utilization values for the previous time intervals.
Step 7 Return to your originating procedure (NTP).
March 2003
(Figure
Utilization Window on the Card View Performance Tab
Interval
Refresh
This task enables you to view line utilization PM counts on a selected
E-Series or G-Series Ethernet card and port to detect possible
performance problems.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
7-7).
NTP-B198 Monitor Ethernet Performance
Cisco ONS 15327 Procedure Guide, R4.0
7-17