Table 3-2 Ethernet Threshold Variables (Mibs) - Cisco ONS 15327 Procedure Manual

Hide thumbs Also See for ONS 15327:
Table of Contents

Advertisement

Chapter 3
Turn Up Node
Table 3-2
Variable
ifOutDiscards
dot3statsAlignmentErrors
dot3StatsFCSErrors
dot3StatsSingleCollisionFrames
dot3StatsMutlipleCollisionFrame
dot3StatsDeferredTransmissions
dot3StatsLateCollision
dot3StatsExcessiveCollision
dot3StatsCarrierSenseErrors
dot3StatsSQETestErrors
etherStatsJabbers
etherStatsUndersizePkts
etherStatsFragments
etherStatsPkts64Octets
etherStatsPkts65to127Octets
etherStatsPkts128to255Octets
etherStatsPkts256to511Octets
etherStatsPkts512to1023Octets
etherStatsPkts1024to1518Octets
etherStatsJabbers
March 2003
Ethernet Threshold Variables (MIBs) (continued)
NTP-B34 Create Ethernet RMON Alarm Thresholds
Definition
The number of outbound packets that were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted
Number of frames with an alignment error, i.e., the length is not
an integral number of octets and the frame cannot pass the Frame
Check Sequence (FCS) test
Number of frames with framecheck errors, i.e., there is an
integral number of octets, but an incorrect Frame Check
Sequence (FCS)
Number of successfully transmitted frames that had exactly one
collision
Number of successfully transmitted frames that had multiple
collisions
Number of times the first transmission was delayed because the
medium was busy
Number of times that a collision was detected later than 64 octets
into the transmission (also added into collision count)
Number of frames where transmissions failed because of
excessive collisions
The number of transmission errors on a particular interface that
are not otherwise counted
A count of times that the SQE TEST ERROR message is
generated by the PLS sublayer for a particular interface
Total number of Octets of data (including bad packets) received
on the network
Number of packets received with a length less than 64 octets
Total number of packets that are not an integral number of octets
or have a bad FCS, and that are less than 64 octets long
Total number of packets received (including error packets) that
were 64 octets in length
Total number of packets received (including error packets) that
were 65 – 172 octets in length
Total number of packets received (including error packets) that
were 128 – 255 octets in length
Total number of packets received (including error packets) that
were 256 – 511 octets in length
Total number of packets received (including error packets) that
were 512 – 1023 octets in length
Total number of packets received (including error packets) that
were 1024 – 1518 octets in length
Total number of packets longer than 1518 octets that were not an
integral number of octets or had a bad FCS
Cisco ONS 15327 Procedure Guide, R4.0
3-25

Advertisement

Table of Contents
loading

Table of Contents