Dlp-B122 Enable Intermediate-Path Performance Monitoring - Cisco ONS 15327 Procedure Manual
Hide thumbs
Also See for ONS 15327:
- User documentation (559 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
NTP-B73 Enable Performance Monitoring
Figure 7-2
Pointer justification counts
Return to your originating procedure (NTP).
Step 8
DLP-B122 Enable Intermediate-Path Performance Monitoring
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
The monitored IPPM parameters are STS CV-P, STS ES-P, STS SES-P, STS UAS-P, and STS FC-P. For
Note
more information about IPPM parameters, refer to the Cisco ONS 15327 Reference Manual.
In node view, double-click the LTE card you want to monitor. The card view appears.
Step 1
See
Click the Provisioning tab.
Step 2
Cisco ONS 15327 Procedure Guide, R4.0
7-4
Viewing Pointer Justification Counts
Performance tab Card view
Table 7-1 on page 7-2
for a list of Cisco ONS 15327 LTE cards.
This task enables intermediate-path performance monitoring, which
allows you to monitor large amounts of STS traffic through intermediate
nodes.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
Chapter 7
Monitor Performance
March 2003
Advertisement
Table of Contents
