Ntp-B172 Create A Logical Network Map - Cisco ONS 15327 Procedure Manual
Hide thumbs
Also See for ONS 15327:
- User documentation (559 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
Chapter 4
Turn Up Network
Click the Provisioning > Protection tabs. Verify that all protection groups have been created according
Step 7
to your site plan. If not, see the
on page
Click the Provisioning > Security tabs. Verify that all users have been created and their security levels
Step 8
match the settings indicated by your site plan. If not, see the
Security" procedure on page
Step 9
If SNMP is provisioned on the node, click the Provisioning > SNMP tabs. Verify that all SNMP settings
match the settings of your site plan. If not, see the
page
Stop. You have completed this procedure.
NTP-B172 Create a Logical Network Map
Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
From the View menu choose Go to Network View.
Step 2
Change the position of the nodes in the network view according to your plan.
Step 3
a.
b.
c.
On the network view map, right-click and choose Save Node Position.
Step 4
Click Yes on the Save Node Position dialog box.
Step 5
CTC displays a progress bar and saves the new node positions.
Note
Stop. You have completed this procedure.
March 2003
9-12.
9-17.
9-23.
This procedure positions nodes in the network view. This procedure allows
a superuser to create a consistent network view for all nodes on the
network.
None
NTP-B35 Verify Node Turn Up, page 4-2
As needed
Onsite or remote
Superuser
"DLP-B60 Log into CTC" task on page
Press the Ctrl key while you drag and drop a node icon to a new location.
Deselect the previously selected node.
Repeat Steps
a
and
b
for each node you need to position.
Nodes on the network map can be moved by users with retrieve, provisioning, and maintenance
security levels, but new network views can only be saved by a superuser. To restore the view to
a previously saved version of the network map, right-click the network view map and choose
Reset Node Position.
"NTP-B203 Modify or Delete 1+1 Card Protection Settings" procedure
"NTP-B87 Change SNMP Settings" procedure on
2-23. If you are already logged in, continue with
NTP-B172 Create a Logical Network Map
"NTP-B205 Modify Users and Change
Cisco ONS 15327 Procedure Guide, R4.0
4-3
Advertisement
Table of Contents
