NTP-B88 Modify Line Settings and PM Parameter Thresholds for Electrical Ports
Table 10-6 Line Threshold Options for DS-3 Ports
Parameter
Port #
CV
ES
SES
LOSS
Table 10-7
Table 10-7 STS-1 Path Threshold Options for DS-3 Ports
Parameter
Port #
CV
ES
FC
SES
UAS
Cisco ONS 15327 Procedure Guide, R4.0
10-8
Description
Port number
Coding violations
Errored seconds
Severely errored seconds
Loss of signal; number of one-second
intervals containing one or more LOS
defects
describes the values on the Provisioning > STS-1 Path Threshold subtab for the DS-3 ports.
Description
DS-3 ports partitioned for STS
Coding violations
Errored seconds
Failure count
Severely errored seconds
Unavailable seconds
Chapter 10
Options
1 to 3
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button.
Options
Read-only
DS-3 ports 1 to 3
any available STS
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button (Near and Far
End, STS termination only).
Change Port Settings
March 2003