Before You Begin - Cisco ONS 15327 Procedure Manual

Turn Up Node
This chapter explains how to provision a single Cisco ONS 15327 node and turn it up for service,
including assigning a node name, date and time, SONET timing references, network attributes such as
IP address and default router, users and user security, and card protection groups.

Before You Begin

Complete the procedures applicable to your site plan from the following chapters:
•
•
This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
1.
2.
3.
4.
5.
6.
7.
8.
March 2003
Chapter 1, "Install Hardware"
Chapter 2, "Connect the PC and Log into the GUI"
NTP-B24 Verify Card Installation, page
NTP-B30 Create Users and Assign Security, page
users and assign their security levels.
NTP-B25 Set Up Name, Date, Time, and Contact Information, page
procedure to set the node name, date, time, location, and contact information.
NTP-B169 Set Up CTC Network Access, page
IP address, default router, subnet mask, and network configuration settings.
NTP-B27 Set Up the ONS 15327 for Firewall Access, page
the ONS 15327 will be accessed behind firewalls.
NTP-B28 Set Up Timing, page
timing references.
NTP-B170 Create Optical Protection Groups, page
set up optical protection groups for ONS 15327 cards.
NTP-B171 Set Up SNMP, page
monitoring.
C H A P T E R
3-2—Complete this procedure first.
3-3—Complete this procedure to create CTC
3-7—Continue with this procedure to provision the
3-16—Continue with this procedure to set up the node's SONET
3-20—Complete this procedure, as needed, to
3-21—Complete this procedure if SNMP will be used for network
Cisco ONS 15327 Procedure Guide, R4.0
3-5—Continue with this
3-13—Continue with this procedure if
3
3-1