Figure 4-7 Path Protection Subtended From A Blsr - Cisco ONS 15327 Procedure Manual

Chapter 4 Turn Up Network
Attach fibers from these cards to the path protection trunk cards on the neighbor path protection node or
Step 2
nodes.
Log into the ONS 15327 that will subtend the path protection. See the
Step 3
on page 2-23
Complete the
Step 4
that will carry the path protection.
Log into the path protection node that connects to the node in
Step 5
Complete the
Step 6
that will carry the path protection.
Repeat
Step 7
From the View menu choose Go To Network View.
Step 8
Figure 4-7
Node 4
Slot 4
Complete the
Step 9
Stop. You have completed this procedure.
March 2003
for instructions.
"DLP-B253 Provision SONET DCC Terminations" task on page 4-5
"DLP-B253 Provision SONET DCC Terminations" task on page 4-5
Step 6 for each node in the path protection.
Path Protection Subtended from a BLSR
Slot 3
Slot 4
Slot 3
Node 3
"NTP-B177 Path Protection Acceptance Test" procedure on page
Slot 1
Slot 2
BLSR
Slot 1
Slot 2
Cisco ONS 15327 Procedure Guide, R4.0
NTP-B46 Subtend a Path Protection from a BLSR
"DLP-B60 Log into CTC" task
for each OC-N card
Step 3.
for each OC-N card
Node 1
Slot 2
Slot 1
Node 2
4-24.
4-31