Table of Contents
Advertisement
Mount the Chassis
Connect Cables, Turn on Power, and Verify Connectivity
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Invisible laser radiation is present. Do not expose to users of telescopic optics. This applies to Class 1/1M
laser products.
This unit is intended for installation in restricted access areas. Only skilled, instructed, or qualified personnel
can access a restricted access area.
This product relies on the building's installation for short-circuit (overcurrent) protection. To reduce risk of
electric shock or fire, ensure that the protective device is rated not greater than: AC: 20A, DC: 40A
This unit might have more than one power supply connection. To reduce risk of electric shock, remove all
connections to de-energize the unit.
To reduce risk of electric shock or personal injury, disconnect DC power before removing or replacing
components or performing upgrades.
To reduce risk of electric shock, when installing or replacing the unit, the ground connection must always be
made first and disconnected last.
If your unit has modules, secure them with the provided screws.
To reduce the risk of electric shock and fire, a readily accessible disconnect device must be incorporated in
the fixed wiring.
Connect Cables, Turn on Power, and Verify Connectivity
Cisco Secure Endpoint PC4000 Hardware Installation Guide
31
Advertisement
Table of Contents
