Ntp-B214 Offload The Security Audit Trail Log - Cisco ONS 15327 Procedure Manual

Chapter 14 Maintain the Node
Manually set the node name and network configuration to site-specific values. See the
Step 12
Up Name, Date, Time, and Contact Information" procedure on page 3-5
Network Access" procedure on page 3-7
gateway, and IIOP port.
Step 13 Return to your originating procedure (NTP).

NTP-B214 Offload the Security Audit Trail Log

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
trail log. If you are already logged in, proceed to Step 2.
In the node view, click the Maintenance > Audit tabs.
Step 2
Step 3 Click Retrieve.
Step 4 Click Archive.
In the Archive Audit Trail dialog, navigate to the directory (local or network) where you want to save
Step 5
the file.
Enter a name in the File Name field.
Step 6
You do not have to give the archive file a particular extension. It is readable in any application that
supports text files, such as WordPad, Microsoft Word (imported), etc.
Click Save.
Step 7
Up to 640 entries will be saved in this file. The next entries will continue with the next number in the
sequence, rather than starting over.
Stop. You have completed this procedure.
March 2003
This procedure stores up to 650 audit trail log entries in a local or
network drive file to maintain a record of actions performed for the
node.
None
None
As needed. If the audit trail log is not offloaded, the oldest entries will
be overwritten after the log reaches capacity.
Onsite or remote
Superuser
"DLP-B 60 Log into CTC" task on page 2-23
NTP-B214 Offload the Security Audit Trail Log
for information on setting the node name, IP address, mask and
at the node where you will offload the audit
Cisco ONS 15327 Procedure Guide, R4.0
"NTP-B 25 Set
and "NTP-B 169 Set Up CTC
14-15