Ntp-B81 Change Node Management Information; Dlp-B140 Change The Node Name, Date, Time, And Contact Information; Chapter 9 Change Node Setting - Cisco ONS 15327 Procedure Manual

NTP-B81 Change Node Management Information

NTP-B81 Change Node Management Information
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
Complete the
Step 2
Click the Provisioning > General tabs.
Step 3
Complete the
Step 4
page
Complete the
Step 5
After confirming the changes, complete the
Step 6
Stop. You have completed this procedure.

DLP-B140 Change the Node Name, Date, Time, and Contact Information

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note Changing the date, time, or time zone may invalidate the node's performance monitoring counters.
Step 1 In node view, click the Provisioning > General tabs.
Change any of the following:
Step 2
•
•
•
•
Cisco ONS 15327 Procedure Guide, R4.0
9-2
This procedure changes basic information about the node such as node
name, date, time, contact information, and the login legal disclaimer.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-B60 Log into CTC" task on page
"NTP-B108 Back Up the Database" procedure on page
"DLP-B140 Change the Node Name, Date, Time, and Contact Information" task on
9-2, as needed.
"DLP-B265 Change the Login Legal Disclaimer" task on page
This procedure changes basic information such as node name, date, time,
and contact information.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
General: Node Name
General: Contact
Location: Latitude
Location: Longitude
2-23. If you are already logged in, continue with
"NTP-B108 Back Up the Database" procedure on page
Chapter 9 Change Node Settings
14-6.
9-3, as needed.
March 2003
14-6.