Ntp-B215 View G1000-2 Ethernet Maintenance Information; Dlp-B305 View J1 Path Trace Information - Cisco ONS 15327 Procedure Manual

NTP-B215 View G1000-2 Ethernet Maintenance Information

NTP-B215 View G1000-2 Ethernet Maintenance Information
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
are already logged in, continue with Step 2.
As needed, use the following tasks to change the display of Ethernet maintenance information:
Step 2
•
•
•
Stop. You have completed this procedure.

DLP-B305 View J1 Path Trace Information

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, double-click a G1000-2 Ethernet card. The card view displays.
Click the Maintenancetab.
Step 2
Click the J1 Path Trace tab.
Step 3
Click the Retrieve button.
Step 4
View columns to the right to the J1 Path Trace information for each port on the card.
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15327 Procedure Guide, R4.0
14-24
"DLP-B 60 Log into CTC" task on page 2-23
"DLP-B 305 View J1 Path Trace Information" task on page 14-24
"DLP-B 306 View Loopback Status" task on page 14-25
"DLP-B 307 View Ethernet Bandwidth Usage" task on page 14-25
This procedure enables viewing the maintenance information on a
selected G1000-2 Ethernet card.
None
Before you view performance monitoring (PM) values, be sure you have
created the appropriate circuits and provisioned the card according to
your specifications. For more information, see
Circuits and VT Tunnels"
As needed
Onsite or remote
Retrieve or higher
This task changes the screen view to display J1 path trace information
on a selected G1000-2 Ethernet card.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
Chapter 14
Chapter 5, "Create
and Chapter 10, "Change Port Settings."
at the node that you want to monitor. If you
Maintain the Node
March 2003