Cisco ONS 15327 Procedure Manual page 445

Appendix A CTC Information and Shortcuts
Table A-2 CTC Menu and Toolbar Options (continued)
Menu Menu Option
Tools Circuits
Manage VLANs
Open TL1
Connection
Open IOS
Connection
Help Contents and Index
Manage Help
About CTC
March 2003
Toolbar Description
— Displays the following options:
Repair Circuits—(This option is for the Cisco ONS 15454) Repairs
•
incomplete circuits following replacement of the ONS 15454 AIP board.
Refer to the Cisco ONS 15454 Troubleshooting Guide for more information.
Set Path Selector Attributes—Allows you to edit path protection circuit path
•
selector attributes. See the
Selectors" task on page
Set Circuit State—Allows you to change a circuit state. See the
•
Change a Circuit State" task on page
Convert CTC Circuits to TL1 Cross Connects—If a cross-connect in a
•
circuit gets deleted, this menu option allows a user to repair a circuit by
separating an incomplete CTC circuit into TL1 cross-connects. Then, the
user can replace the missing cross-connect. See the
TL1 Cross-Connects to CTC Circuits" procedure on page
• Upgrade TL1 Cross Connects to CTC Circuits—Allows you to convert TL1
cross-connects to CTC circuits. See the
to TL1 Cross-Connects" procedure on page
Roll Circuit—Allows you to reroute live traffic without interrupting service.
•
Note This feature requires an ONS 15600 on your network. Refer to the
Cisco ONS 15600 Procedure Guide.
• Delete Rolls —Allows you to delete roll circuits.
This feature requires an ONS 15600 on your network. Refer to the Cisco
Note
ONS 15600 Procedure Guide.
— Displays a list of VLANs that have been created and allows you to delete or
create new VLANs. See
Displays the TL1 session dialog box so you can create a TL1 session to a
specific node. Refer to the Cisco ONS 15454 and Cisco ONS 15327 TL1
Command Guide.
(Cisco ONS 15454 only) Displays the IOS command line interface dialog box if
an IOS capable card (ML1000-2 or ML100T-12) is installed in the node. Refer
to the Cisco ONS 15454 ML-Series Multilayer Ethernet Card Software Feature
and Configuration Guide.
—
Displays the online help window.
— Displays the versions of online help loaded on your computer.
— Displays the software version and the nodes in the CTC session.
"DLP-B233 Edit Path Protection Circuit Path
8-11.
8-8.
"NTP-B416 Convert a CTC Circuit
8-13.
Chapter 5, "Create Circuits and VT Tunnels."
Cisco ONS 15327 Procedure Guide, R4.0
Manage the CTC Window
"DLP-B230
"NTP-B417 Upgrade
8-14.
A-5