Dlp-B241 Clear A Blsr Manual Ring Switch - Cisco ONS 15327 Procedure Manual

Chapter 12 Convert Network Configurations

DLP-B241 Clear a BLSR Manual Ring Switch

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Caution Traffic is not protected during a Force protection switch.
Display the network view.
Step 1
Click the Provisioning > BLSR tabs.
Step 2
Choose the BLSR and click Edit.
Step 3
To move an icon to a new location, for example, to see BLSR channel (port) information more clearly,
Tip
click an icon on the Edit BLSR network graphic and while pressing Ctrl, drag the icon to a new location.
Right-click the BLSR node channel (port) where the Manual ring switch was applied and choose
Step 4
Set West Protection Operation or Set East Protection Operation, as applicable.
In the dialog box, choose CLEAR from the drop-down menu. Click OK.
Step 5
Click Yes on the Confirm BLSR Operation dialog box. The letter "M" is removed from the channel (port)
Step 6
and the span turns green.
From the File menu, choose Close.
Step 7
Return to your originating procedure (NTP).
Step 8
March 2003
This task clears a Manual ring switch.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite
Provisioning or higher
NTP-B159 Modify a BLSR
Cisco ONS 15327 Procedure Guide, R4.0
12-11