Ntp-B22 Set Up Ctc Computer To Connect To The Ons 15327 - Cisco ONS 15327 Procedure Manual

NTP-B22 Set Up CTC Computer to Connect to the ONS 15327

Set the JRE reference:
Step 2
a.
b.
c.
d.
Note
Step 3 Return to your originating procedure (NTP).
NTP-B22 Set Up CTC Computer to Connect to the ONS 15327
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 From
Note
Cisco ONS 15327 Procedure Guide, R4.0
2-8
Run the Control Panel by typing:
JRE-path /j2re1_3_0_02/bin/ControlPanel
Click the Advanced tab.
From the combo box, select JRE-path/j2re1_3_1_02. If the JRE is not found, select other and enter
the following in the Path text box:
JRE-path /j2re1_3_1_02
Click Apply.
If you are running multiple shells, before your new environment variable is set you might need
to invoke the same shell for which you changed the initialization file. For example, if you added
the environment variable to the .cshrc file, you must run your browser under the csh shell.
This procedure explains how to set up a PC running Windows or a Solaris
workstation to connect to the ONS 15327.
Depends on connection type
NTP-B21 Set Up Computer for CTC, page 2-1
As needed
Onsite or remote
None
Table 2-1, select the ONS 15327 connection type that you want to set up for your computer.
For initial shelf turn up, you should connect your PC directly to the LAN port on the XTC card
of the ONS 15327.
Chapter 2 Connect the PC and Log into the GUI
March 2003