Dlp-B115 Create Alarm Severity Profiles - Cisco ONS 15327 Procedure Manual

Chapter 6 Manage Alarms
Complete the
Step 1
profile.If you are already logged in, continue with
with
Complete the
Step 2
alarm profile, renames the profile, and customizes the new profile. Continue with
Complete the
Step 3
an alarm severity profile from a CD or a node.
As necessary, complete the
Step 4
"DLP-B117 Apply Alarm Profiles to Cards and Nodes" task on page
Stop. You have completed this procedure.

DLP-B115 Create Alarm Severity Profiles

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, choose Go to Network View from the View menu.
Step 1
Click the Provisioning > Alarm Profiles tabs
Step 2
Click Load.
Step 3
In the Select Profile(s) from Node or Filename to Load dialog box, click the From Node radio button.
Step 4
Click the node name you are logged into in the Node Names list.
Step 5
Click Default to highlight this profile in the Profile Names list.
Step 6
Step 7 Click OK.
The default alarm severity profile appears in the Alarm Profiles window
November 2004
"DLP-B60 Log into CTC" task on page 2-23
Step 3 to download an alarm profile.
"DLP-B115 Create Alarm Severity Profiles" task on page
"DLP-B223 Download an Alarm Severity Profile" task on page
"DLP-B116 Apply Alarm Profiles to Ports" task on page 6-21
Use this task to create a custom severity profile by modifying the default
severity profile.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
NTP-B70 Create, Download, and Assign Alarm Severity Profiles
at the node where you want to create an alarm
Step 2 to clone or modify an alarm profile, or continue
6-17. This task clones a current
6-24.
(Figure 6-3 on page 6-6).
(Figure
Cisco ONS 15327 Procedure Guide, R4.0
Step 4.
6-20. This task downloads
or the
6-8).
6-17