Ntp-B165 Import Network Element Defaults - Cisco ONS 15327 Procedure Manual

Appendix C Network Element Defaults

NTP-B165 Import Network Element Defaults

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
Step 2.
Step 2 Click the Provisioning > Defaults Editor tabs.
Click Import.
Step 3
If the correct file name and location do not appear in the Import Defaults from File dialog box, click
Step 4
Browse and browse to the file you are importing.
When the correct file name and location appear in the dialog box (the correct file name is
Step 5
15327-defaults.txt if you are importing the factory defaults), click OK.
A pencil icon will appear next to any default value that will be changed as a result of importing the new
defaults file.
Step 6 Click Apply.
Click Yes on the confirmation dialog box. The dialog box appears if you are modifying node-level
Step 7
defaults; it notifies you that applying defaults for node level attributes overrides current provisioning.
Note
Stop. You have completed this procedure.
March 2003
This procedure imports the NE defaults using the NE Defaults Editor. The
defaults can either be imported from the CTC software CD (factory
defaults) or from a customized file exported and saved from a node.
None
As needed
Onsite or remote
Superuser only
"DLP-B60 Log into CTC" task on page
Changes to node settings take effect when you click Apply. Changes to the IIOP Listener Port
setting reboots the XTC. Changes made to card settings using the Defaults Editor do not change
the settings for cards that are currently installed or slots that are pre-provisioned for cards. Card
settings must be manually changed by using the procedures in
Settings."
NTP-B165 Import Network Element Defaults
2-23. If you are already logged in, continue with
Chapter 10, "Change Port
Cisco ONS 15327 Procedure Guide, R4.0
C-3