Dlp-B158 Change User And Security Settings - Single Node - Cisco ONS 15327 Procedure Manual
Hide thumbs
Also See for ONS 15327:
- User documentation (559 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
Chapter 9
Change Node Settings
Under Concurrent Logins, click Single Session Per User if you want to limit users to a single login
Step 6
session.
Under Password Change, you can modify the following:
Step 7
•
•
Users can change their passwords after they meet one of the two conditions. For example, if you set the
number of different passwords to 5 and the number of days to 20, users can reuse a password after they
change their password 5 times or after 20 days elapse, whichever occurs first.
Click OK.
Step 8
On the Security Policy Change Results dialog box, confirm the changes, then click OK.
Step 9
Return to your originating procedure (NTP).
Step 10
DLP-B158 Change User and Security Settings - Single Node
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Security > Users tabs.
Step 1
Click the user whose settings you want to modify.
Step 2
Click Change.
Step 3
In the Change User dialog box, enter the following:
Step 4
•
•
•
•
See
Click OK.
Step 5
Note
Return to your originating procedure (NTP).
Step 6
March 2003
Require [nn] different passwords...—Choose a value between 0 and 10 to determine how many
different passwords have to be created before a password can be reused.
...or a waiting period of [nn] days before password reuse—Choose a value between 0 and 30 days
to set the amount of time (in days) before a password can be reused.
This task changes settings for an existing user at one node.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Superuser
New Password
Confirm New Password
Security Level
You can also lock out the user by selecting the check box.
the"NTP-B30 Create Users and Assign Security" procedure on page 3-3
User settings that you changed during this task will not appear until that user logs off and logs
back in again.
NTP-B205 Modify Users and Change Security
for field descriptions.
Cisco ONS 15327 Procedure Guide, R4.0
9-19
Advertisement
Table of Contents
