Equipment Inventory; Table Display Options - Cisco ONS 15327 Procedure Manual

Appendix A CTC Information and Shortcuts
Table A-6
Task
Sort table (secondary
sorting keys)
Reset sorting
View table row count
(Row Count is the last
item on the shortcut
menu) View the number
listed next to "Row
Count," it is the last
item on the shortcut
menu.

Equipment Inventory

In node view, the Inventory tab displays information about the ONS 15327 equipment, including:
•
•
•
•
•
•
•
•
•
•
March 2003
Table Display Options (continued)
Click
Press the Shift key and
simultaneously click the column
header.
—
—
Delete Button—After highlighting a card with your mouse, use this button to delete the card from
node view. See also the "DLP-B320 Delete a Card" task on page
Reset Button—After highlighting a card with your mouse, use this button to reset a card.
Location—Where the equipment is installed, either chassis or slot number.
Eqpt Type—Displays the type of equipment but not the specific card name, for example, OC12 or
MIC.
Actual Eqpt Type—Displays the actual equipment type, for example, 15327-OC48-1.
HW Part #—Hardware part number; this number is printed on the top of the card or equipment piece.
HW Rev—Hardware revision number.
Serial #—Equipment serial number; this number is unique to each card.
CLEI Code—Common Language Equipment Identifier code.
Firmware Rev—Revision number of the software used by the ASIC chip installed on the ONS 15327
cards.
Equipment Inventory
Right-Click Shortcut Menu
Choose Sort Column
(incremental).
Choose Reset Sorting.
—
1-26.
Cisco ONS 15327 Procedure Guide, R4.0
A-9