Ntp-B203 Modify Or Delete 1+1 Card Protection Settings - Cisco ONS 15327 Procedure Manual

NTP-B203 Modify or Delete 1+1 Card Protection Settings

In the Preferences dialog box, click the General tab.
Step 2
The Preferences Management area field lists all dialog boxes where "Do not show this dialog again" was
checked.
Choose one of the following:
Step 3
•
•
Click OK.
Step 4
Return to your originating procedure (NTP).
Step 5
NTP-B203 Modify or Delete 1+1 Card Protection Settings
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Modifying and deleting protection groups can be service affecting.
Caution
Step 1 Complete the
Step 2.
Step 2 Complete the
Perform any of the following tasks as needed:
Step 3
•
•
Complete the
Step 4
Stop. You have completed this procedure.
Cisco ONS 15327 Procedure Guide, R4.0
9-12
Don't Show Any—Hides all do-not-display check boxes.
Show All—Overrides do-not-display check box selections and displays all dialog boxes.
Use this procedure to modify or delete 1+1 card protection settings.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-B60 Log into CTC" task on page
"NTP-B108 Back Up the Database" procedure on page
DLP-B154 Modify a 1+1 Protection Group, page 9-13
DLP-B155 Delete a Protection Group, page 9-14
"NTP-B108 Back Up the Database" procedure on page
Chapter 9
2-23. If you are already logged in, continue with
14-6.
14-6.
Change Node Settings
March 2003