Dlp-B325 Install Coaxial Cable With Bnc Connectors; Figure 1-16 Installing A Straight Ds-1 Cable - Cisco ONS 15327 Procedure Manual

NTP-B220 Install the Electrical Cables

Figure 1-16 Installing a Straight DS-1 Cable

Step 4 Return to your originating procedure (NTP).

DLP-B325 Install Coaxial Cable With BNC Connectors

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Always use the supplied ESD wristband when working with a powered ONS 15327. Plug the wristband
Caution
cable into the ESD jack located between the top high-speed and XTC slots.
Step 1 Place a BNC cable connector over the connector on the MIC.
Figure 1-17
Cisco ONS 15327 Procedure Guide, R4.0
1-38
This task installs the coaxial cable with BNC connectors to connect DS-3
signals to the ONS 15327.
Shielded coaxial cable terminated with BNC connectors for DS-3 ports
As needed
Onsite
None
shows how to connect a coaxial cable to an ONS 15327 MIC.
Chapter 1 Install Hardware
March 2003